Swithing power supply

Switching power supply (S-15) Output voltage:5V/12V/24V Input voltage:220V and 110V Power capacity: 15W to 2000W ISO9001:200

S-15 series switching power supply

GeneralLow price and high reliability105°C output capacitor AC input power suitable for the world Hight efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With Short-circuit and owwerload protection Compact size,light weight100% full-load burning test Installed with EMI filter,minimum wave.

Model and spec

ModelSpecification	S-15-5	S-15-12	S-15-24
DC output voltage	5V	12V	24V
Output voltage error(Note2)	±2%	±1%	±1%
Rated output current	3A	1.3A	0.7A
Output current rage	0-3A	0-1.3A	0-0.7A
Wave and noise(Note 3)	50mVp-p	50mVp-p	100mVp-p
Inlet stability(Note 4)	±0.5%	±0.5%	±0.5%
Load stablity (Note 5)	±1%	±0.5%	±0.5%
DC output power	15W	15.6W	16.8W
Efficiency	65%	68%	72%
Adjustable range for DC voltage	+10,-5%	+10%	+10%
AC input voltage range	85-132VAC/170-264VACSelected by switch47-63Hz:240-370VDC
Input current	0.5A/115V 0.25A/230A
AC INnrush current	Cold-start current15A/115V 30A/230V
Leakage current	<0.5mA/240VAC
Overload proctection	105%-150%Type:Foldback:current limiting reset:auto recovery
Over-voltage protection	…………
High-temperature protection	…………
Temperature coefficient	±0.02%/°C(0-50°C)
Setup rise hold up time	200ms,100ms,30ms
Vibration	10-500HZ,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltage	Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
Isolation resistance	Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ
Working temperature and humidity	-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity	-20°C~+85°C.10%~95%RH
Overall dimension	99×97×35mm
Weight	0.3Kgs
Safety standards	Meet UL 1012 requirement(Not apply for the mark)
EMC standards	Meet FCC part15J Conduction classB
Note:1.The testing condition for the paramenter above is :230VAC input,rated load,25°C70% RH.Humidity.2.Error.include the setting error,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%.

Swithing power supply